Description

Welcome to Zemismart Aliexpress Top Brand Store,Any question feel free to let us know

OTHER OPERATION

• a. External & Internal Temp Check: Long press the” M”and” < "to switch the internal temp or the external temp.
• b. Temp Protection Warning: When the temp is higher or lower the protection value,” fire”will flash,the valve will auto close or open, and adjust the temp to 2℃ higher or 2℃ lower of the protection value,” fire”will stop flash and the protection mode cancel.
• c. ERR Exception :When the” ERR” light up, it means the sensor mode was wrong or the sensor was broken. And the temp value in the screen will show “–“.
• d. “WIFI “flash slowly, it means the WiFi connect is failed.
• e. There have the Anti-locking Function.
• f. Check the MAC Address: When the thermostat is power off, and long press the “”,enter the checking mode, and press ” “to select the address.

CONNECT TO THE INTERNET

• a. Press ” < " for 3s, " WIFI" will flash quickly
• b. APP enter the Add device page, select the type of product.
• c. Input the SSID and password, then pairing.

INSTALL STEPS

• 1.Connect each wiring
• 2.Connect the steel to the 86 box
• 3.Buckle up the Power box and Panel

ADVANCED SETTINGS

When the thermostat is power on,long press the ” “(5s) , press ” M” select the setting item, and press ” ” to select .

• 1.Sensor Type: 00: Internal 01: External 02: Internal&External. Default is 00
• 2 .High temp protection: 35~95℃, Default Is 95℃, “–” Cancel the Protection
• 3.LowTemp Protection:0~10℃, Default is 5℃, “–” Cancel the Protection
• 4.Swing: 0-9 ℃, Default 2 ℃
• 5.Temperature calibration ADJ : -9℃~+9℃, Default is 0℃
• 6.Highest target temp:35~90℃, Default is 35℃
• 7.Lowest target temp:0~30 ℃, Default is 5℃
• 8.Home mode target temp:Default is 24℃
• 9.Eco mode target temp: Default is 18℃
• 10.Away mode target temp:Default is 15℃
• 11.System restart: Press ” ” to Switch the “–” to “==” and Wait for 5s
• 12.Factory setting: Press ” ” to switch the “–” to “==” and Wait for 5s